HW-Range Industrial Extraction Fan
Heavy Duty Centifugal - Powerful - Quiet
The HW range of centrifugal fans are of the direct drive pattern, single
inlet backward inclined i.e. non-overloading characteristic. The range
are constructed from heavy gauge steel plate for rigorous industrial
use. The design features high efficiency, low energy consumption, long
working life. Suitable for the extraction of gases, fume, dust and where
volatile fume extraction is undertaken, anti spark proof features are
embodied in the construction.
Flameproof motors available where required. Units
available for any electrical voltage. Stainless steel construction optional
| HW.8 |
1800-2500 |
0.55 |
150 dia |
150 dia |
Wall Bracket |
| HW.11 |
2500-3800 |
0.75 |
150 dia |
150 dia |
Wall Bracket |
| HW.16 |
3800-5000 |
1.5 |
200 dia |
200 dia |
Foot/Wall Bracket |
| HW.30 |
5000 @ 150mm |
4.0 |
400 dia |
410x280 |
Foot/Wall Bracket |
| HW.50 |
5000 @ 250mm |
7.5 |
450 dia |
500x310 |
Foot/Wall Bracket |
CF-Range Industrial Extraction Fan
The CF range of fan units allow a wide variety of duties to be achieved.
Each unit comprises a double inlet centrifugal fan assembly powered
by a TEFC motor via a vee rope drive assembly. There is a choice of
air inlet/air outlet size and position. Features include an adjustable
motor base for ease of belt tensioning, anti vibration mountings and
a large hinged access door for inspection/servicing.
Units available for wall mounting or stand/floor mounting.
The cabinet of the standard range is manufactured from
steel plate, stainless steel cabinets available. Where required motors
can be mounted outside the air stream, external to the main cabinet.
Flameproof assemblies available.
| CF.20 |
2000-3000 |
1.5 |
To suit application |
Variable |
| CF.30 |
3000-4500 |
2.2 |
To suit application |
Variable |
| CF.40 |
4500-7500 |
4.0 |
To suit application |
Variable |
| CF.75 |
7500-10000 |
5.5 |
To suit application |
Variable |
Portable Extraction Fan
The Horizon portable fan/motor assemblies are available in two sizes,
Models HW.8.P and HW.11.P. These two units have nominal air volume capacities
of 1800 m3/hr and 2500 m3/hr respectively, free blowing. The units weigh
28 Kg and 30 Kg respectively. Units available for 110 volts single phase,
220/240 volts single phase and 415 volts three phase.
Ideally suitable for on-site construction
work, building sites, tank air extraction, vehicle fume extraction etc.
The units can be used for blowing fresh air into a restricted space,
in addition to extracting foul air out. Units available on swivel braked
wheels, for additional mobility.
The Model HW.11.P.12R is available
on wheels, with push handle, and fitted with 2m radius SMOG-RAMBLER,
self supporting extraction arm/hood assembly.
PORTABLE EXTRACTION FAN
WITH LARGE CAPACITY
|
