Summer Ventilation
During hot periods the HEAT-SAVER may be used as a ventilator, to guarantee a certain movement of air and therefore providing a sense of freshness.
How Many Units Required
Calculate the volume of unused roof space (buildings with flat roofs, allow 600mm height). Multiply by 5, divide by 60, divide by 2000 – this gives you the number of HEAT-SAVERS required. We recommend however contact with our technical department for further advice as other factors often affect the correct selection, e.g. type of factory heating installed.
| |
| FAN UNIT |
Double inlet forward curved centrifugal. Speed 900 rpm, for exceptionally low noise level. |
| MOTOR |
180 watts, 220/240 volts single phase 50 cycles. Bearings lubricated and sealed for life. |
| AIR VOLUME |
3400 m3/hr |
| WEIGHT |
32 Kg |
| LENGTH OF THROW |
Adjustable between 4.6m – 18.3m |
| MAIN CASING |
18 gauge zintec coated sheet steel, primed and finished painted |
| DIMENSIONS |
500x480x530mm H |
| AIR INLET |
Combination Air Inlet Grille / Protection Guard fitted |
| OUTLET GRILLE |
Four way, fully adjustable warm air outlet grille |
| CONTROL |
On/off adjustable thermostat mounted on unit casing |
|
